This lightweight full range personal PA system features two 5" Eminence® speakers with a high frequency driver, multiple inputs, phanto power, and balanced XLR outputs.
Specifications
Output Power
50W
Accepted Inputs
Channels 1 and 2: Mic XLR, Line level 1/4" Un-balanced
Hum and Noise
-65 dB: Residual noise, all level controls at 0% (minimum)
-48 dB Nominal system noise, all level controls at 50%
System Gain (Measurements made at 1 kHz)
+70 dB: Mic to speaker output (Channel 1 and 2)
+56 dB: Line to speaker output (Channel 1 and 2)
+42 dB AUX IN to speaker output
Channel EQ (High, low)
4 kHz and above, 800 Hz and below
Powerlink (In and OUT)
Both jacks accept a balanced input and sends a pre-master volume output mix of channels.
Recommended use. Linking two PW505BT units together
Subwoofer Out
Line out, 200 Hz-150 Hz
Phantom Power
+15, Mic inputs (Channel 1 and 2)
Power Requirements
Europe: 230VAC/50 Hz, 80 W Nominal
UK: 230VAC/50 Hz, 80 W Nominal
Speakers
2 x 5", 25 W 16 Ohm each
Horn
3.5" piezo driver
Power Capacity
50 W, RMS
Frequency Response
60 Hz - 20 kHz, Full range (subwoofer jack not used)
150 Hz - 20 kHz, Crossover active ( 1/4" mono plug in subwoofer jack )
Nominal Impedance
Not designed for external speakers
Bluetooth® Module Features
Bluetooth® 3.0+EDR compliant Typical +2 dBm Class 2 output power Audio DAC 94 dB SNR A2DP profile support
Top Hat Speaker Connector: 35mm / 1 3/8" diameter
Dimensions
7.2" W x 18.8" H x 7.3" D
192mm W x 478mm H x 185mm D
Weight
16 lbs
7.2 kg
Specifications
Output Power
50W
Accepted Inputs
Channels 1 and 2: Mic XLR, Line level 1/4" Un-balanced
Hum and Noise
-65 dB: Residual noise, all level controls at 0% (minimum)
-48 dB Nominal system noise, all level controls at 50%
System Gain (Measurements made at 1 kHz)
+70 dB: Mic to speaker output (Channel 1 and 2)
+56 dB: Line to speaker output (Channel 1 and 2)
+42 dB AUX IN to speaker output
Channel EQ (High, low)
4 kHz and above, 800 Hz and below
Powerlink (In and OUT)
Both jacks accept a balanced input and sends a pre-master volume output mix of channels.
Recommended use. Linking two PW505BT units together
Subwoofer Out
Line out, 200 Hz-150 Hz
Phantom Power
+15, Mic inputs (Channel 1 and 2)
Power Requirements
Europe: 230VAC/50 Hz, 80 W Nominal
UK: 230VAC/50 Hz, 80 W Nominal
Speakers
2 x 5", 25 W 16 Ohm each
Horn
3.5" piezo driver
Power Capacity
50 W, RMS
Frequency Response
60 Hz - 20 kHz, Full range (subwoofer jack not used)
150 Hz - 20 kHz, Crossover active ( 1/4" mono plug in subwoofer jack )
Nominal Impedance
Not designed for external speakers
Bluetooth® Module Features
Bluetooth® 3.0+EDR compliant Typical +2 dBm Class 2 output power Audio DAC 94 dB SNR A2DP profile support
Top Hat Speaker Connector: 35mm / 1 3/8" diameter
Dimensions
7.2" W x 18.8" H x 7.3" D
192mm W x 478mm H x 185mm D
Weight
16 lbs
7.2 kg
Downloads
About Powerwerks
Powerwerks P.A. systems and speakers are designed in the USA to deliver high-quality audio, useful 'real world' features and rugged, reliable performance. This quality is due in part to the combined experience of the Powerwerks engineers, which totals more than 100 years in the biz.